TYREDOG™ TD-2700F-X Series with Extended Range. Expandable from 2 to 36 Wheels. 

The TYREDOG™ TD-2700F-X Series Tyre Pressure and Temperature Monitor kits support 2 to 36 tyres, monitors up to 180 PSI and can be installed (D.I.Y)
The User Friendly Graphic Interface (LCD monitor) allows the user to monitor and understand the status of their tyres. Thus ensuring they are always well maintained.
Correct tyre pressure ensures fuel efficiency, reduces tyre wear, the risk of aquaplaning and lack of traction.
Normally all the necessary check-ups cost time, effort and money.

The Design

All sensors can be securely locked onto tyre valves for added safety.
Learnable sensors are available so in the event of theft or damage, sensors can be quickly and easily replaced.
Sensors have unique individual codes to ensure there is no interference from other 433MHz devices, even other TYREDOG™ systems.
All TYREDOG™ kits undergo strict field testing to ensure quality.
Sensors are treated for anti-corrosion during manufacture and use rubber seals to prevent liquid and fine particles from coming in contact with the circuitry.

How it works

The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.
The Relay / repeater system must be mounted underneath the vehicle. This can be powered up by 4 x AA Batteries or you can hard-wire to a 12V/24V Power Source.
Once the Sensors and Relay are fitted and the monitor/receiver is turned on (Powered by 12/24V Cigarette Lighter Adaptor), within a couple of minutes or once the wheels rotate, the latest Pressure and Temperature information will be updated on the monitor/receiver.

Note: Relay must be used otherwise the unit will not work.

The sensors are constantly monitoring and reading your tyre pressure and temperature and as soon as there is a change in pressure, the sensors will transmit the latest pressure and temperature reading to your monitor.
If the Pressure falls or raises above the user preset levels, the unit will sound to alert the driver. There is also a visual indication on the Monitor / Receiver unit.
Low, High Pressure and High Temperature threshold settings can be adjusted by the user for each axle.
For further information regarding the operation of this unit, please read the Owners Manual which can be found by clicking on the Downloads Tab.